How To Stake Down a Tent on Concrete? [Easy Fix]

How to Stake Down a Tent on Concrete

That might not seem like a smart thing to pitch a tent on a concrete block, but there are times when there are no other options. Although you won’t be able to put tent stakes into the ground, placing up a tent on concrete is simple.

It makes no difference whether your tents are freestanding or not. Your tent must constantly be able to be set up.

You may set up your tent on the concrete just like any other surface. The main distinction is that tent stakes will not be able to be driven in.

Freestanding tents aren’t a problem only if it’s stormy, although certain tents require pegs for architectural stability. To stake down a non-freestanding tent, you’ll need to use hefty boulders or some form of weight.

How Can You Stake Down Your Tent on Concrete?

Tents can be secured without stakes easily. All you need is something substantial to attach your tent to a non-freestanding tent or fasten the sides of a freestanding tent.

In this article, you will know everything you need to know regarding staking your tent on a concrete block in the remainder of this piece.

Establishing a tent on grassland is simple, but when you have to set up camp on a concrete slab, folks look perplexed. You won’t be able to drive stakes into the corners, so you’ll have to get inventive.

Simply bring medium-sized boulders or weights from home to fasten the corners. That seems a simple thing. Here are the steps you need to follow for staking down your tent on concrete-

  • Clean the surface: Remove any trash from the space. You don’t want to pitch your tent on logs or rocks since they may pierce or rip the bottom off. Cleansing the tents will also assure your relaxation.
  • Spread out your tent: Set up your tent near the site area by spreading it out. Dust off any dirt that may have accumulated in your tent since the previous time you used it, and extend out all of the edges.
  • Use a tent footprint: It is recommended to use a sheet or tent footprint beneath your tent since it will assist protect the tent surface. Pitching up a tent on cement is similar to sanding it down. The flimsy tented floor will be scratched and ground down.
  • Spread out the edges: Before fastening the sides with stones, spread out all of those edges to smooth them out. You’ll use your ropes connected to stones to bring your tarps into place with non-freestanding tents.
  • Use heavy stones to retain the ropes: To retain a freestanding tent, all you need is a 15-20 pound weight on the inside of each corner. In the event of heavy winds, put a sheet beneath the rocks to shield the tent flooring from debris and tears. 
  • In case you don’t find heavy stones: You always can retain each corner with your cooler and random heavy items. You’ll need a heavy boulder as a pillar and tiny stones or random stuff to tie upon with a non-freestanding tent. The larger rock or heavy items tie on the rope, while the small items serve as a gap beyond.

How To Set Up a Freestanding Tent

Without anchors or ropes, a freestanding tent is structurally sound. The tent poles serve as a physical framework over which the cloth can drape. Stakes aren’t strictly required for the structure of a freestanding tent, but you should still are using them to secure your tent from the wind. 

It’s simple to set up a tent on concrete. Simply set up your tent as usual and anchor the corners with large boulders or any other load. The pebbles aren’t physically essential, but they might keep your tent from blowing away in heavy winds.

How To Set Up a Non-Freestanding Tent

It can be difficult to set up a non-freestanding tent on cement. Tentpoles, rope, and anchors are used to maintain a non-freestanding tent. If you don’t find a means to hold the ropes, your tent will collapse. 

To keep the ropes tight, place two boulders on each corner of the tent. One of the boulders serves as an anchor to keep the tent in place, while the other is linked to a rope beneath the rock.


How Much Weight Is Required To Hold Down the Tent on Concrete?

You don’t need a lot of weight to keep your tent in place. Simply find a 10-pound boulder for each of your ropes, and it should suffice. A tent must be able to be held down with around 40 pounds of tie-down weight.

Will Concrete Damage the Surface of My Tent?

Because concrete has a coarse texture, it will wear on down bottom of the tent over time. It’s the same as if you were doing it on sandpaper. The concrete texture on the tent surface will gradually dig into the cloth as you walk through it.

While erecting the tent, place a sheet or tent footprint on the ground to cover the floor. To avoid water gathering, make sure the footprint is somewhat shorter than the tent’s edges.

Is It Safe To Sleep on the Hard Floor?

Experts do not recommend sleeping on the hard ground. To avoid sleeping on the chilly, hard floor, most campers use a foamy or inflated sleeping bag, air mattress, or camping cot.

Because air mattresses are poorly sealed, they should be avoided in cooler temperatures. The cold air beneath your body swiftly depletes your body heat.

How Do You Protect Tents From High Winds?

In windy conditions, place your tent in the way that provides the most safety and security, which usually means guiding the least and thinnest sections towards the wind. Set the tent at a tilt to the wind to distribute the pressure of the storms more equally.

To Summarize

Generally, people camp in the wild on land which is pretty easy to set up. But if you decide to place your tent on a concrete floor then the setup can be a little tricky.

But don’t worry, we have got your back in this article. If you follow the suggestions that have been explained above, you can enjoy your camping on a concrete floor without any hassle.

You may also like: